Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discreet, doesn't use LED indications or key fobs and is concealed within the wiring of the vehicle.
It also permits the user to temporarily disable the system by using Transport Mode for when they are renting their vehicle. This guide will walk you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system links directly to your vehicle's ECU and is protected by a unique PIN code that you can choose. It's inaccessible to thieves using scanners for diagnostics or other modern methods, and is unable to be disabled by cutting circuits.
The system is simple to use, however professional installation is recommended to ensure a clean connection to the ECU of your vehicle. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complete your vehicle's security package.
To prevent an accidental deployment of airbags or short circuits, the installer must first disconnect your battery. When the battery is disconnected, the installer can be able to work safely. Basic hand tools are helpful for securing connections with precision and a multimeter can be used to verify electrical values and safety. Cable tie and insulation tape are crucial to ensure connections are secure and keep wiring tidy. The Ghost Immobiliser user's manual will give specific instructions that are tailored to your model.
It is important to choose an area for grounding that is free of any paint or debris during installation. The installer should be sure that the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. The wires can be plugged into or soldered depending on the model. To ensure a secure and long-lasting connection it is recommended you choose a top-quality plug.
Once the install is complete, the customer can activate after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. The customer must press the icon for service on the dashboard five times within 2 seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a smart option for those who regularly rents out their vehicles through platforms such as Turo. Immobilisers can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
You won't have a problem with an autowatch immobiliser in order to guard your car from theft. The device stops your car from running even when someone copies or steals your key. This is due to its high-tech technology that is designed to stop the engine from starting unless the correct PIN code is entered.
The device connects to the vehicle's bus system CAN and allows direct communication with the ECU. It makes use of the buttons on your dashboard and steering wheel to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the best security system that will safeguard your pride and joy and preserve its value in the event that you decide to sell it in the future.
Installing a ghost immobiliser is an easy process, however, it's important to follow the steps carefully to avoid issues with electricity and system malfunctions. First, you must locate a 12V power supply and a suitable grounding for the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors and soldering techniques for a secure connection. Also, be sure to insulate the connections with heat shrink tubing and insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires are connected, you are able to reconnect the battery and turn on the engine to test the function of the immobiliser. Once you have verified that everything is working correctly and you are satisfied, you can place the immobiliser in a secure location in the vehicle. Make sure to hide it well to prevent a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it complies with the highest standards of security and is a fantastic deterrent to car thieves. It is invulnerable to key cloning and hacking and is not able to be disabled without the code. It is simple to use, and it can be set to an option for a service valet so that your vehicle will not be activated when you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to deter theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your car. Ghost Immobiliser doesn't interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.
The system is also inaccessible by thieves using diagnostic scanning tools. The system does not send or receive radio frequency signals and instead uses CAN data for communication with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one button) and then switch on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash two times to verify that you have entered the correct code. Once web link 've verified this, you're able to start your vehicle and leave with peace of mind.
Once installed, the Ghost Immobiliser safeguards your vehicle against hacking or key cloning while also protecting its value. If you ever need to surrender your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need find an energy source that is constant (12V) and an earthing point. Be sure that both are well-insulated and can be touched. It's also recommended to use cable tie to secure and bundle the wires, as this reduces the risk of theft by thieves. Be sure to double-check the position of these points to avoid making mistakes, and mark them with a piece of tape or label. It's also a good idea to check all connections for signs wear and tear. Make sure all connections are securely in place, and properly protected. Also, don't forget test the Ghost Immobiliser after the installation is complete. This will make sure that the unit is operating properly, and that all connections are safe and well-insulated. If there are any issues, make certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that integrates seamlessly into your vehicle's ECU to block unauthorised engine start. Its innovative technology protects your car from key cloning, hacking, and other methods that thieves employ to steal cars. The Ghost also works in conjunction with other alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unique features and subtle design make it a popular choice for car enthusiasts and security-conscious drivers alike.
It is essential to follow the steps of installation to ensure the proper integration of Ghost Immobiliser. Refer to the wiring diagram of your vehicle as it will help you locate and connect the wires. You'll then need to identify the power and grounding sources. Once you have located them, you will have to mark them to make them easy to locate when installing. In addition, it is important to use top-quality tools and materials. Hand tools are essential to assist you in making precise connections. A multimeter will verify electrical values, and also ensure safety. Cable ties and insulation tape will keep the connections neat and tidy. Finally, a user manual will provide specific guidance tailored to your Ghost model.
Before beginning the installation it is important to test the system by entering the PIN code and then starting the vehicle. This step will confirm that the immobiliser works in the way it was intended, preventing unauthorized vehicle start-ups. This step should be performed regularly as part of your routine vehicle inspections in order to ensure that the system is always working correctly.
After the installation has been completed, you can start driving your car with confidence. The Ghost will keep your pride and joy safe from potential thieves and ensure that nobody is able to drive off with your vehicle without the correct PIN. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts to steal or tamper with. This allows you to track your car in the event that it's stolen.
The Ghost is compatible with a variety of automobiles, including those from most major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our service and installation options. We are a TASSA Registered installer This certification ensures that we adhere to strict standards and procedures for installing our products. This ensures customers as well as insurance companies and law enforcement agencies that all installations are done safely and in a safe manner.